TOGAMI PAK-Series Contactor

Togami magnetic starters have been regulary used throughout industries for the excellence and reliability for over a half century. The PAK.RSK-J/H series (6AF~800AF) for general use and the CLK-J/H series (15AF~250AF) for specialized for low operation use, magnetic contactors & starters and also the TJ series thermal overload relays succeeded such a time-honored tradition are assured maximum satisfaction to customers in the world.

PRODUCTS CONFORMING TO RoHS DIRECTIVE

Features :
  • Standardized Din rail mounting
  • Easy-read coil ratings
  • Fast, simple coil replacemment
  • Improved reliability of auxiliary contact
  • Enhanced electrical life (AC3)
  • Various optional units enhance the functions of magnetic starters
DOWNLOAD PDF FOR SPECIFICATION

PANASONIC Motor Induction 1 Phase Series

Features :
  • It is fitted for continuous running in one direction.
  • Continuous time rating.
  • The motor with national specifications is of heatproof class 120 (E); the motor with specifications compliant with overseas standards is of heatproof 130 (B).
  • Because it is a capacitor-type induction motor, it has a high power factor and runs with a low noise level.
Note 1) The induction motor cannot make a quick-reversal run because of the torque acting in the opposite direction. Therefore stop the induction motor once, change the wire connections and make a reverse run. Note 2) Induction Motor start-stop operation must not exceed 6-cycles per minute or demage may occur. DOWNLOAD PDF FOR SPECIFICATION

Weidmüller DRM-Series Relay

The DRM is available in 2 and 4 changeover contact versions for AC and DC voltages to suit most industrial and commercial applications. DRM relays are available with LED status indication, as well as a test lever for quick and easy commissioning and troubleshooting. The relay bases are DIN-rail mountable and feature high quality screw terminals. DOWNLOAD PDF FOR SPECIFICATION

WEINTEK iP-Series

New iP Series
  • Boasts excellent performance with better operation experience compared to its predecessor.
  • Weintek’s compact HMI Series-iP has upgraded in every aspect to satisfy a variety of applications.
  • Equipped with Cortex A8 600MHz CPU.
  • Seamlessly upgraded from EB8000 to EasyBuilder Pro.
DOWNLOAD PDF FOR SPECIFICATION  

KSS MD-Series (2M) Wiring Duct slotted

  • Material : High impact, warp-proof PVC, self-extinguishing, UL approved 94V-0
  • Color : Grey
  • Maximum Service temperature : 85°C
  • UL Test up to 50°C
  • These devices are for routing of wires within devices in factory installations.
  • Features parallel holes on both sidewalls to facilitate cutting in wire application.
  • Special color, size, length upon request of reasonable quantity.
  • Regular wiring duct cover can be upgrade to NON-SLIP ones which improves tightness between duct and cover. Suitable for vertical installations, improves effectiveness and avoid cover slip off.
  • For size widther than 125mm, please call for order.

KSS MD-Series 8mm(2M) Wiring Duct slotted | kabel duct panel

  • Material: UL94V-0 dan M1 tahan api, PVC yang disetujui UL
  • Warna: Abu-abu.
  • Uji UL hingga 50℃
KSS WIRING DUCT (SLOTTED) datasheet 

Micno KE300 Series Sensorless Vector Control Inverter

KE300 is launched based on the perfect combination of years of experience and advanced drive technology. According to the perfect understanding to customers' requirements, KE300 integrates with sensorless vector control, V/f control, torque control and soft start functions, widely applied in pump & fan, and the applications which require high speed control accuracy, rapid torque response and high performance at low frequency.   Application :
  • Pumps & Fans
  • Washing industry
  • Machine tool equipment
  • Woodworking equipment
  • Simple lifting equipment
  • Air compressor, centrifugal, etc.
  • other medium-end applications
Micno KE300 Series     

SIKES Braking Resistor RGLG Series

RGLG Series resistor is superior to conventional ceramic-skeleton resistor in terms of weatherproof. Oscillation-resistant and safety and is widely applied to electrical circuits that has high adaptability board ambient. Such as power supply, inverter and servo system. And has high adaptability to bad ambient operating conditions. It can be easily fitted in an airtight manner and additional heat radiator can be fixed to it in an easy way. With elegant appearance, it is an ideal component that is perfectly compatible with power and electronic. DOWNLOAD PDF FOR SPECIFICATION

SIKES Braking Resistor RXG20 Series

Two terminal extensions are fixed on both ends of a ceramic tube on whose surface winds wave-shaped alloy resistance wire and a high temperature resistant and fireproof coaling are applied. The ceramic tube can function as resistance wire skeleton and heat radiator as well. This product can be customized to special needs of customers and applicable to simulation load test, equipment discharge, automated control and inverter's energy loss brake. DOWNLOAD PDF FOR SPECIFICATION

MEAN WELL Power Supply RS-100 Series

Produk dapat di indent jika tidak tersedia stock dengan jangka waktu : *Harga barang indent (By Air): Harga + 20% Indent by Air: Mean Well ready stock + 21 Hari (3 Minggu) Mean Well not ready stock + 49 Hari (7 Minggu) Indent by Sea: Mean Well ready stock + 30 Hari (1 Bulan) Mean Well not ready stock + 60 Hari (2 Bulan) DOWNLOAD PDF FOR SPECIFICATION

MEAN WELL Power Supply RS-75 Series

Produk dapat di indent jika tidak tersedia stock dengan jangka waktu : *Harga barang indent (By Air): Harga + 20% Indent by Air: Mean Well ready stock + 21 Hari (3 Minggu) Mean Well not ready stock + 49 Hari (7 Minggu) Indent by Sea: Mean Well ready stock + 30 Hari (1 Bulan) Mean Well not ready stock + 60 Hari (2 Bulan) DOWNLOAD PDF FOR SPECIFICATION