MEAN WELL XLG-50 adalah driver LED AC/DC 50W yang menampilkan output mode daya konstan.

XLG-50 beroperasi pada 90~305VAC.

Berkat efisiensi tinggi hingga 90%, seluruh seri mampu beroperasi antara Kisaran suhu casing lebar -40℃~90℃ dengan konveksi udara.

Desain housing logam dan tingkat perlindungan lP67, memungkinkan seri ini cocok untuk aplikasi di dalam dan luar ruangan.

XLG-50 dilengkapi dengan berbagai pilihan fungsi, seperti metodologi peredupan, sehingga memberikan fleksibilitas desain optimal untuk sistem pencahayaan LED.

XLG -50 seri mematuhi versi terbaru peraturan keselamatan internasional IEC61347/GB19510.1 dan UL8750. Sirkuit keluaran dan peredupan juga sepenuhnya sesuai dengan peraturan baru dengan isolasi untuk menjamin keselamatan pengguna dan sistem luminer selama pemasangan.

Fitur

‧Keluaran mode Daya Konstan
‧Desain rumah logam dengan Ground fungsional
‧Fungsi PFC aktif bawaan
‧Unit daya kelas 2
‧Tanpa beban / Konsumsi daya siaga <0,5W
Peringkat ‧lP67 untuk instalasi dalam dan luar ruangan
‧Opsi fungsi: keluaran dapat disesuaikan melalui potensiometer
Fungsi peredupan 3 in 1 (Desain redup hingga mati dan isolasi)
‧Masa pakai tipikal>50.000 jam

Spesifikasi

MODEL			XLG-50 –
OUTPUT	RATED CURRENT (Default)		1A
	CONSTANT CURRENT REGION Note.2		22 ~54V
	RATED POWER		100VAC ~ 305VAC
			50W
	CURRENT RIPPLE		5.0% max. @rated current
	OPEN CIRCUIT VOLTAGE (max.)		57V
	CURRENT ADJ. RANGE		0.53 ~ 2.1A
	SETUP, RISE TIME Note.3		500ms, 100ms/115VAC, 230VAC
INPUT	VOLTAGE RANGE	Note.4	90 ~ 305VAC 127 ~ 431VDC (Please refer to “STATIC CHARACTERISTIC” section)
	FREQUENCY RANGE		47 ~ 63Hz
	POWER FACTOR		PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)
	TOTAL HARMONIC DISTORTION		THD< 10%(@load≧50%/115VC,230VAC; @load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
	EFFICIENCY (Typ.)	Note.10	90%
	AC CURRENT		0.57A / 115VAC 0.29A / 230VAC 0.24A/277VAC
	INRUSH CURRENT(Typ.)		COLD START 50A(twidth=350μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
	MAX. No. of PSUs on 16A CIRCUIT BREAKER		5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC
	LEAKAGE CURRENT		<0.75mA / 277VAC
	NO LOAD / STANDBY POWER CONSUMPTION		No load power consumption <0.5W for A, <0.75W for I series Standby power consumption <0.5W for AB-Type(Dimming OFF)
PROTECTION	OVER POWER		110-150% Over Power Protection, recovers automatically after fault condition is removed
	SHORT CIRCUIT		Constant current limiting, recovers automatically after fault condition is removed
	OVER TEMPERATURE		Hiccup mode, recovers automatically after fault condition is removed
	INPUT OVER VOLTAGE Note.8		320 ~ 370VAC (Shut down output voltage when the input voltage exceeds protection voltage,recovers automatically after fault condition is removed)
			Can survive input voltage stress of 440Vac for 48 hours
ENVIRONMENT	WORKING TEMP.		Tcase=-40 ~ +90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
	MAX. CASE TEMP.		Tcase=+90℃
	WORKING HUMIDITY		20 ~ 95%
	STORAGE TEMP.		-40 ~ +80℃
	TEMP. COEFFICIENT		±0.03%/℃ (0 ~ 60℃)
	VIBRATION		10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS Note.8		UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC AS/NZS IEC BS EN/EN61347-1, AS/NZS BS EN/EN61347-2-13 independent, BS EN/EN62384; IP67; GB19510.1, GB19510.14, EAC TP TC 004,J61347-1(H29), J61347-2-13(H29),KC61347-1,KC61347-2-13, IS15885(Part2/Sec13)( for XLG-50I type only); NOM–058–SCFI–2017 approved
	WITHSTAND VOLTAGE		I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
	ISOLATION RESISTANCE		I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION		Parameter	Standard		Test Level/Note
			Conducted	BS EN/EN55015(CISPR15) ,GB/T17743		—–
			Radiated	BS EN/EN55015(CISPR15) ,GB/T17743		—–
			Harmonic Current	BS EN/EN61000-3-2 ,GB/T17625.1		Class C @load≥50%
			Voltage Flicker	BS EN/EN61000-3-3		—–
	EMC IMMUNITY		BS EN/EN61547
			Parameter	Standard		Test Level/Note
			ESD	BS EN/EN61000-4-2		Level 3, 8KV air ; Level 2, 4KV contact
			Radiated	BS EN/EN61000-4-3		Level 3
			EFT/Burst	BS EN/EN61000-4-4		Level 3
			Surge	BS EN/EN61000-4-5		4KV/Line-Line 6KV/Line-Earth
			Conducted	BS EN/EN61000-4-6		Level 3
			Magnetic Field	BS EN/EN61000-4-8		Level 4
			Voltage Dips and Interruptions	BS EN/EN61000-4-11		>95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods
OTHERS	MTBF		3931.6 K hrs min. Telcordia SR-332 (Bellcore) 394.6Khrs min.		MIL-HDBK-217F (25℃)
	DIMENSION		1056330mm (LWH)
	PACKING		0.41Kg;24pcs/ 10.5Kg/0.81CUFT for A-type 0.42Kg;24pcs/ 11Kg/0.81CUFT for AB-type
NOTE	All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature. Please refer to “DRlVlNG METHODS OF LED MODULE”. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. De-rating may be needed under low input voltages. Please refer to STATlC CHARACTERlSTlC sections for details. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75℃ or less. Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com lnput over voltage only for XLG-50 l series ,and l series without UL/CSA certificate. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). Only for XLG-50-A Products sourced from the Americas regions may not have the CCC/PSE/BlS/KC logo. Please contact your MEAN WELL sales for more information. For any application note and lP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. To fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains. lf you need the NOM (Mexico) certificate, Please contact MEAN WELL sales representative for details. ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

MEAN WELL XLG-50 Series

Cocok diaplikasikan pada:
‧Penerangan jalan LED
‧Pencahayaan arsitektur LED
‧Pencahayaan ruang LED
‧Lampu sorot LED

MEAN WELL XLG-50 SPEC

0 People watching this product now!

Deskripsi
About MEAN WELL

Deskripsi

MODEL			XLG-50 –
OUTPUT	RATED CURRENT (Default)		1A
	CONSTANT CURRENT REGION Note.2		22 ~54V
	RATED POWER		100VAC ~ 305VAC
			50W
	CURRENT RIPPLE		5.0% max. @rated current
	OPEN CIRCUIT VOLTAGE (max.)		57V
	CURRENT ADJ. RANGE		0.53 ~ 2.1A
	SETUP, RISE TIME Note.3		500ms, 100ms/115VAC, 230VAC
INPUT	VOLTAGE RANGE	Note.4	90 ~ 305VAC 127 ~ 431VDC (Please refer to “STATIC CHARACTERISTIC” section)
	FREQUENCY RANGE		47 ~ 63Hz
	POWER FACTOR		PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)
	TOTAL HARMONIC DISTORTION		THD< 10%(@load≧50%/115VC,230VAC; @load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
	EFFICIENCY (Typ.)	Note.10	90%
	AC CURRENT		0.57A / 115VAC 0.29A / 230VAC 0.24A/277VAC
	INRUSH CURRENT(Typ.)		COLD START 50A(twidth=350μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
	MAX. No. of PSUs on 16A CIRCUIT BREAKER		5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC
	LEAKAGE CURRENT		<0.75mA / 277VAC
	NO LOAD / STANDBY POWER CONSUMPTION		No load power consumption <0.5W for A, <0.75W for I series Standby power consumption <0.5W for AB-Type(Dimming OFF)
PROTECTION	OVER POWER		110-150% Over Power Protection, recovers automatically after fault condition is removed
	SHORT CIRCUIT		Constant current limiting, recovers automatically after fault condition is removed
	OVER TEMPERATURE		Hiccup mode, recovers automatically after fault condition is removed
	INPUT OVER VOLTAGE Note.8		320 ~ 370VAC (Shut down output voltage when the input voltage exceeds protection voltage,recovers automatically after fault condition is removed)
			Can survive input voltage stress of 440Vac for 48 hours
ENVIRONMENT	WORKING TEMP.		Tcase=-40 ~ +90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
	MAX. CASE TEMP.		Tcase=+90℃
	WORKING HUMIDITY		20 ~ 95%
	STORAGE TEMP.		-40 ~ +80℃
	TEMP. COEFFICIENT		±0.03%/℃ (0 ~ 60℃)
	VIBRATION		10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS Note.8		UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC AS/NZS IEC BS EN/EN61347-1, AS/NZS BS EN/EN61347-2-13 independent, BS EN/EN62384; IP67; GB19510.1, GB19510.14, EAC TP TC 004,J61347-1(H29), J61347-2-13(H29),KC61347-1,KC61347-2-13, IS15885(Part2/Sec13)( for XLG-50I type only); NOM–058–SCFI–2017 approved
	WITHSTAND VOLTAGE		I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
	ISOLATION RESISTANCE		I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION		Parameter	Standard		Test Level/Note
			Conducted	BS EN/EN55015(CISPR15) ,GB/T17743		—–
			Radiated	BS EN/EN55015(CISPR15) ,GB/T17743		—–
			Harmonic Current	BS EN/EN61000-3-2 ,GB/T17625.1		Class C @load≥50%
			Voltage Flicker	BS EN/EN61000-3-3		—–
	EMC IMMUNITY		BS EN/EN61547
			Parameter	Standard		Test Level/Note
			ESD	BS EN/EN61000-4-2		Level 3, 8KV air ; Level 2, 4KV contact
			Radiated	BS EN/EN61000-4-3		Level 3
			EFT/Burst	BS EN/EN61000-4-4		Level 3
			Surge	BS EN/EN61000-4-5		4KV/Line-Line 6KV/Line-Earth
			Conducted	BS EN/EN61000-4-6		Level 3
			Magnetic Field	BS EN/EN61000-4-8		Level 4
			Voltage Dips and Interruptions	BS EN/EN61000-4-11		>95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods
OTHERS	MTBF		3931.6 K hrs min. Telcordia SR-332 (Bellcore) 394.6Khrs min.		MIL-HDBK-217F (25℃)
	DIMENSION		1056330mm (LWH)
	PACKING		0.41Kg;24pcs/ 10.5Kg/0.81CUFT for A-type 0.42Kg;24pcs/ 11Kg/0.81CUFT for AB-type
NOTE	All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature. Please refer to “DRlVlNG METHODS OF LED MODULE”. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. De-rating may be needed under low input voltages. Please refer to STATlC CHARACTERlSTlC sections for details. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75℃ or less. Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com lnput over voltage only for XLG-50 l series ,and l series without UL/CSA certificate. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). Only for XLG-50-A Products sourced from the Americas regions may not have the CCC/PSE/BlS/KC logo. Please contact your MEAN WELL sales for more information. For any application note and lP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. To fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains. lf you need the NOM (Mexico) certificate, Please contact MEAN WELL sales representative for details. ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

About MEAN WELL

MEAN WELL adalah produsen profesional power supply standar dunia, yang mencakup produk 0,5 hingga 25600W yang banyak digunakan di industri.

MEAN WELL XLG-50 Series

Mean Well Power Supply DPU Series

Mean Well Power Supply LRS Series

Mean Well Power Supply RQ Series

Mean Well Power Supply RS Series

MEAN WELL Power Supply RS-75 Series

MEAN WELL Power Supply RSP-75 Series

Mean Well Power Supply RSP-75~500 Series

Mean Well Power Supply Security DIN Type

MEN WELL NDR Series

Power Supply Mean Well EDR Series

QUICK QUOTE

Drives

Resistor

Automation

HMI

Wiring & Accessories

Power Supply

Contactor

Multi-Brand Quote

Tersedia Juga Brand

Merek

Kategori

MEAN WELL XLG-50 Series

Produk Terkait

QUICK QUOTE

Drives

Resistor

Automation

HMI

Wiring & Accessories

Power Supply

Contactor

Multi-Brand Quote

Tersedia Juga Brand

Merek

Kategori

Formulir Layanan Reparasi

Data Customer

Detail Suku Cadang

RISACORPS UPLOAD

RISACORPS MICNO

RISACORPS SIKES

RISACORPS MAX LETATWIN

RISACORPS TOGAMI

RISACORPS WEINTEK

RISACORPS WEIDMULLER

RISACORPS KSS

RISACORPS NIDEC SHIMPO

RISACORPS HITACHI

RISACORPS PANASONIC INDUSTRY

Form Penawaran RISACORPS Solusi Sistem

RISACORPS Event 2024

RISACORPS ABB

RISACORPS MEAN WELL