Deskripsi
MEAN WELL Seri LRS-50 adalah power supply 50w tipe single output enclosed dengan desain profil rendah 30mm. Mengadopsi input 85 ~ 264VAC jangkauan penuh, seluruh seri menyediakan saluran tegangan output 3.3V, 5V, 12V, 15V, 24V, 36V dan 48V.
Selain efisiensi tinggi hingga 90%, desain kotak jaring logam mampu meningkatkan pembuangan panas LRS-50, sehingga seluruh seri beroperasi dari -30℃ hingga 70℃ di bawah konveksi udara tanpa kipas.
MEAN LRS-50 mengkonsumsi daya tanpa beban yang sangat rendah (kurang dari 0,2W), hal ini memungkinkan sistem akhir dengan mudah guna memenuhi kebutuhan energi di seluruh dunia.
LRS-50 memiliki fungsi perlindungan yang lengkap dan kemampuan anti-getaran 5G; itu mematuhi peraturan keselamatan internasional seperti TUV BS EN/EN62368-1, BS EN/EN60335-1,BS EN/EN61558-1/-2-16, UL62368-1 dan GB4943. Seri LRS-50 berfungsi sebagai solusi catu daya dengan harga sesuai kinerja tinggi untuk berbagai aplikasi industri.
Fitur
‧Input AC universal / Jangkauan penuh
‧Tahan masukan lonjakan 300VAC selama 5 detik
‧Konsumsi daya tanpa beban<0,3W
‧Ukuran miniatur dan profil rendah 1U
‧Suhu pengoperasian tinggi hingga 70℃
‧Perlindungan: Hubungan pendek / Kelebihan beban / Tegangan berlebih
‧Pendinginan dengan konveksi udara bebas
‧Kepatuhan terhadap IEC/BS EN/EN 60335-1(PD3) dan
IEC/BS EN/EN61558-1, -2-16 untuk peralatan rumah tangga
‧Ketinggian pengoperasian hingga 5000 meter (Catatan.8)
‧Tahan uji getaran 5G
‧Efisiensi tinggi, umur panjang dan keandalan yang tinggi
‧Indikator LED untuk menyalakan
‧Kategori tegangan berlebih Ⅲ
‧100% uji burn-in beban penuh
Spesifikasi
MODEL | LRS-50-3.3 | LRS-50-5 | LRS-50-12 | LRS-50-15 | LRS-50-24 | LRS-50-36 | LRS-50-48 | |
OUTPUT | DC VOLTAGE | 3.3V | 5V | 12V | 15V | 24V | 36V | 48V |
RATED CURRENT | 10A | 10A | 4.2A | 3.4A | 2.2A | 1.45A | 1.1A | |
CURRENT RANGE | 0 ~ 10A | 0 ~ 10A | 0 ~ 4.2A | 0 ~ 3.4A | 0 ~ 2.2A | 0 ~ 1.45A | 0 ~ 1.1A | |
RATED POWER | 33W | 50W | 50.4W | 51W | 52.8W | 52.2W | 52.8W | |
RIPPLE & NOISE (max.) Note.2 | 80mVp-p | 80mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | 200mVp-p | 200mVp-p | |
VOLTAGE ADJ. RANGE | 2.97 ~ 3.6V | 4.5 ~ 5.5V | 10.2 ~ 13.8V | 13.5 ~ 18V | 21.6 ~ 28.8V | 32.4 ~ 39.6V | 43.2 ~ 52.8V | |
VOLTAGE TOLERANCE Note.3 | ±3.0% | ±2.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
LINE REGULATION Note.4 | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
LOAD REGULATION Note.5 | ±2.0% | ±1.0% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
SETUP, RISE TIME | 1000ms, 30ms/230VAC 2000ms,30ms/115VAC at full load | |||||||
HOLD UP TIME (Typ.) | 30ms/230VAC 12ms/115VAC at full load | |||||||
INPUT | VOLTAGE RANGE | 85 ~ 264VAC 120 ~ 373VDC | ||||||
FREQUENCY RANGE | 47 ~ 63Hz | |||||||
EFFICIENCY (Typ.) | 80% | 83% | 86% | 88% | 88% | 89% | 90% | |
AC CURRENT (Typ.) | 0.95A/115VAC 0.56A/230VAC | |||||||
INRUSH CURRENT (Typ.) | COLD START 45A/230VAC | |||||||
LEAKAGE CURRENT | <0.75mA / 240VAC | |||||||
PROTECTION |
OVER LOAD | 110 ~ 150% rated output power | ||||||
Protection type : Hiccup mode, recovers automatically after fault condition is removed | ||||||||
OVER VOLTAGE | 3.8 ~ 4.45V | 5.9~ 7.3V | 13.8 ~ 17.2V | 18.75 ~ 25.75V | 28.8 ~ 36.6V | 41.4 ~ 51.6V | 55.2 ~ 67.8V | |
Protection type : Shut down o/p voltage, re-power on to recover | ||||||||
ENVIRONMENT | WORKING TEMP. | -30 ~ +70℃ (Refer to “Derating Curve”) | ||||||
WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |||||||
STORAGE TEMP., HUMIDITY | -40 ~ +85℃, 10 ~ 95% RH non-condensing | |||||||
TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 50℃) | |||||||
VIBRATION | 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes | |||||||
OVER VOLTAGE CATEGORY | Ⅲ; Compliance to BS EN/EN61558, BS EN/EN50178, BS EN/EN60664-1, BS EN/EN62477-1; altitude up to 2000 meters | |||||||
SAFETY & EMC (Note 9) |
SAFETY STANDARDS | UL62368-1, TUV BS EN/EN62368-1, BS EN/EN60335-1, BS EN/EN61558-1/-2–16,CCC GB4943.1, BSMI CNS15598-1, EAC TP TC 004, AS/NZS 60950.1(by CB),KC K60950-1(for LRS-50-12/24 only), BIS IS13252(Part1): 2010/IEC 60950-1: 2005(except for LRS-50-48) approved | ||||||
WITHSTAND VOLTAGE | I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC | |||||||
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH | |||||||
EMC EMISSION | Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN55014, BS EN/EN61000-3-2,-3, GB/T 9254, BSMI CNS15936, EAC TP TC 020,KC KN32,KN35(for LRS-50-12/24 only) | |||||||
EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61000-6-2 (BS EN/EN50082-2),BS EN/EN55035, heavy industry level, EAC TP TC 020,KC KN32,KN35(for LRS-50-12/24 only) | |||||||
OTHERS | MTBF | 3149.8K hrs min. Telcordia SR-332 (Bellcore) ; 561.6Khrs min. MIL-HDBK-217F (25℃) | ||||||
DIMENSION | 99*82*30mm (L*W*H) | |||||||
PACKING | 0.23Kg; 60pcs/14.8Kg/0.88CUFT | |||||||
NOTE |
mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx | |||||||
