Deskripsi
Seri LRS-35 adalah power supply 35W tipe single-output enclosed dengan desain profil rendah 30mm. Mengadopsi input 85~264VAC jangkauan penuh, seluruh seri menyediakan saluran tegangan output 5V, 12V, 15V, 24V, 36V, dan 48V.
Selain efisiensi tinggi hingga 89%, desain kotak jaring logam meningkatkan pembuangan panas LRS-35 sehingga seluruh seri beroperasi dari -30℃ hingga 70℃ di bawah konveksi udara tanpa kipas.
Menghadirkan konsumsi daya tanpa beban yang sangat rendah (kurang dari 0,2W), hal ini memungkinkan sistem akhir dengan mudah memenuhi kebutuhan energi di seluruh dunia. LRS-35 memiliki fungsi perlindungan lengkap dan kemampuan anti-getaran 5G; itu mematuhi peraturan keselamatan internasional seperti TUV BS EN/EN62368-1, BS EN/EN60335-1,BS EN/EN61558-1/-2-16, UL62368-1 dan GB4943. Seri LRS-35 berfungsi sebagai solusi catu daya dengan harga sesuai kinerja tinggi untuk berbagai aplikasi industri.
Fitur
‧ Input AC universal / Jangkauan penuh
‧ Menahan input lonjakan 300VAC selama 5 detik
‧ Tidak ada konsumsi daya beban<0.2W
‧ Ukuran miniatur dan profil rendah 1U
‧ Suhu pengoperasian tinggi hingga 70°C
‧ Perlindungan: Korsleting / Kelebihan beban / Tegangan berlebih
‧ Pendinginan dengan konveksi udara bebas
‧ Kepatuhan terhadap IEC/BS EN/EN 60335-1(PD3) dan IEC/BS EN/EN61558-1, -2-16 untuk peralatan rumah tangga
‧ Ketinggian operasi hingga 5000 meter (Catatan.8)
‧ Tahan uji getaran 5G
‧ Efisiensi tinggi, umur panjang, dan keandalan tinggi
‧ LED indikator
Spesifikasi
MODEL | LRS-35-5 | LRS-35-12 | LRS-35-15 | LRS-35-24 | LRS-35-36 | LRS-35-48 |
OUTPUT | DC VOLTAGE | 5V | 12V | 15V | 24V | 36V | 48V |
RATED CURRENT | 7A | 3A | 2.4A | 1.5A | 1A | 0.8A |
CURRENT RANGE | 0 ~ 7A | 0 ~ 3A | 0 ~ 2.4A | 0 ~ 1.5A | 0 ~ 1A | 0 ~ 0.8A |
RATED POWER | 35W | 36W | 36W | 36W | 36W | 38.4W |
RIPPLE & NOISE (max.) Note.2 | 80mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | 200mVp-p | 200mVp-p |
VOLTAGE ADJ. RANGE | 4.5 ~ 5.5V | 10.2 ~ 13.8V | 13.5 ~ 18V | 21.6 ~ 28.8V | 32.4 ~ 39.6V | 43.2 ~ 52.8V |
VOLTAGE TOLERANCE Note.3 | ±2.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% |
LINE REGULATION Note.4 | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
LOAD REGULATION Note.5 | ±1.0% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
SETUP, RISE TIME | 1000ms, 30ms/230VAC 2000ms,30ms/115VAC at full load |
HOLD UP TIME (Typ.) | 30ms/230VAC 12ms/115VAC at full load |
INPUT | VOLTAGE RANGE | 85 ~ 264VAC 120 ~ 373VDC |
FREQUENCY RANGE | 47 ~ 63Hz |
EFFICIENCY (Typ.) | 82% | 86% | 86% | 88% | 88% | 89% |
AC CURRENT (Typ.) | 0.7A/115VAC 0.42A/230VAC |
INRUSH CURRENT (Typ.) | COLD START 45A/230VAC |
LEAKAGE CURRENT | <0.75mA / 240VAC |
PROTECTION | OVER LOAD | 110 ~ 150% rated output power |
Protection type : Hiccup mode, recovers automatically after fault condition is removed |
OVER VOLTAGE | 5.75 ~ 6.9V | 13.8 ~ 16.2V | 18.75 ~ 21.75V | 28.8 ~ 33.6V | 41.4 ~ 48.6V | 55.2 ~ 64.8V |
Protection type : Shut down o/p voltage, re-power on to recover |
ENVIRONMENT | WORKING TEMP. | -30 ~ +70℃ (Refer to “Derating Curve”) |
WORKING HUMIDITY | 20 ~ 90% RH non-condensing |
STORAGE TEMP., HUMIDITY | -40 ~ +85℃, 10 ~ 95% RH non-condensing |
TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 50℃) |
VIBRATION | 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes |
OVER VOLTAGE CATEGORY | Ⅲ; According to BS EN/EN61558, BS EN/EN50178, BS EN/EN60664-1, BS EN/EN62477-1; altitude up to 2000 meters |
SAFETY & EMC (Note 9) | SAFETY STANDARDS | UL62368-1, TUV BS EN/EN62368-1, BS EN/EN60335-1, BS EN/EN61558-1/-2–16,CCC GB4943.1, BSMI CNS15598-1, EAC TP TC 004,AS/NZS 60950.1(by CB),KC K60950-1(for LRS-35-12/24 only), BIS IS13252(Part1): 2010/IEC 60950-1: 2005(except for LRS-35-48) approved |
WITHSTAND VOLTAGE | I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC |
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH |
EMC EMISSION | Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN55014, BS EN/EN61000-3-2,-3, GB/T 9254, BSMI CNS15936, EAC TP TC 020,KC KN32,KN35(for LRS-35-12/24 only) |
EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61000-6-2 (BS EN/EN50082-2), BS EN/EN55035, heavy industry level, EAC TP TC 020,KC KN32,KN35(for LRS-35-12/24 only) |
OTHERS | MTBF | 3201.5K hrs min. Telcordia SR-332 (Bellcore) ; 655.5Khrs min. MIL-HDBK-217F (25℃) |
DIMENSION | 99*82*30mm (L*W*H) |
PACKING | 0.23Kg ; 60pcs/14.8Kg/0.88CUFT |
NOTE | - All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
- Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
- Tolerance : includes set up tolerance, line regulation and load regulation.
- Line regulation is measured from low line to high line at rated load.
- Load regulation is measured from 0% to 100% rated load.
- Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.
- 5V when the load factor 0~50%, the switching power less is reduced by burst operation, which will cause ripple and ripple noise to go beyond the specifications.
- The ambient temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m(6500ft).
- The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com) ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx |
