Sold out
Menunggu gambar produk

MINAS LIQI servo drives (low cost)

MINAS LIQI series servo drives are ideal for applications that require an affordable technological upgrade to improve reliability and performance. Machines for simple food processing, packaging, printing, metal processing, even small linear robots are but a few example applications for which MINAS LIQI drives are cut out. In combination with Panasonic FP series PLCs, e.g. FP0R and FP-X0, they can be used to realize simple motion solutions. Use our banner freeware PANATERM to configure MINAS LIQI.

Download For Specification

0 People watching this product now!
Deskripsi

Deskripsi

Simple

Pulse train input 
MINAS LIQI supports pulse train commands of up to 500kpps, adequate for simple positioning control. With 2500 pulses/revolution, the incremental encoder enables a resolution of 10000 pulses/revolution.

1kHz response frequency
A bandwidth of 1kHz guarantees quick response times, resulting in very low vibration.

Setup with PANATERM software via USB
MINAS LIQI servo drives can be set up with the freeware PANATERM via USB. Set all driver parameters and monitor important data such as position, speed and torque.

Functional

Real-time auto-gain tuning
MINAS LIQI features real-time auto-gain tuning just like MINAS A5 servo drives. By setting only the stiffness parameter, gain parameters are calculated automatically and in real time at each load inertia change. Thanks to the vibration suppression function, the drive’s performance is improved, helping protect equipment from damage.

Rotary switch (RSW)
Using the rotary switch (RSW) on the servo drive’s front panel, you can set the “stiffness” on site, directly manipulating the servo drive’s gain.

Damping filters, notch filters
MINAS LIQI drivers are equipped with damping and notch filters just like MINAS A5 servo drives.

MINAS LIQI supports up to 4 notch filters (range: 50Hz-5000Hz).

Damping filters reduce oscillations while starting and stopping. A frequency range of 1Hz to 200Hz is supported.

Powerful

With MINAS LIQI drives, simple positioning applications can be realized quickly, without sacrificing accuracy or speed. The advanced real-time auto-gain tuning function allows MINAS LIQI drives to be particularly efficient in combination with Panasonic FP series PLCs. Especially the compact FP0R and FP-X0 series, which are equipped with high-speed counters and advanced motion functions, fit perfectly.

Typical applications include small assembly and packaging machines, robots, positioners, automatic loaders, extruders, metering and other applications requiring precision, speed — and a user-friendly, inexpensive servo drive.

Produk Terkait

Placeholder

AH1 (FJ) Switches

, ,
TYPICAL APPLICATIONS • Electric pot • Automobiles (Detection of key position), etc   Download For Specification
Quick view
Sold out
Placeholder

KT4H / KT4B – space saving, high perfomance

, , ,
  1. Multi-input Versatile thermocouple, RTD, DC voltage and DC current input for temperature detecting sensors
  2. Simple operation enables highly accurate temperature control All required operations can be enabled by the front keys and highly accurate PID control mode ensures an input span of ±0.2%.
  3. DIN Rail mounting types are aligned taking global market demand into consideration The KT7 series is equipped with DIN rail mounting complying to DIN standards. Furthermore, because its control panel is compact, the KT7 saves space.
  4. Nine step pattern control possible. For KT2 series, despite DIN 48 × 24 size, selection is possible of control with fixed set point and nine step pattern control.
  5. Meets market demands for costeffectiveness The KT series offers both economy and high performance.
  6. The KT series complies with UL, CSA standards and CE marking.
  7. Improved visibility and ease of operation More compact than before The KT4H/KT4B series features the largest PV digit size in the industry. Visibility is improved with an 11-segment display. Connectable to a PC, it offers a full range of control and communication functionsN
Download for specifications
Quick view
Sold out
Placeholder

Panasonic KT9 PID Temperature Controller, 96 x 96mm, 1 Output Relay, 100 → 240 V ac Supply Voltage

, , ,
Professional range of Digital Temperature Controllers to suit a wide variety of applications. Flush mount controller with membrane sheet keys. Dual LED display to determine the actual & reference values at a glance. Panasonic KT series provide an energy efficient solution without compromising on performance. Optional free software available from Panasonic to allow parameters to be set from a computer, along with data logging / monitoring facilities. This Temperature Controller software can be accessed via link in the datasheet Download for specification
Quick view

PANASONIC Motor Induction 1 Phase Series

,
Features :
  • It is fitted for continuous running in one direction.
  • Continuous time rating.
  • The motor with national specifications is of heatproof class 120 (E); the motor with specifications compliant with overseas standards is of heatproof 130 (B).
  • Because it is a capacitor-type induction motor, it has a high power factor and runs with a low noise level.
Note 1) The induction motor cannot make a quick-reversal run because of the torque acting in the opposite direction. Therefore stop the induction motor once, change the wire connections and make a reverse run. Note 2) Induction Motor start-stop operation must not exceed 6-cycles per minute or demage may occur. DOWNLOAD PDF FOR SPECIFICATION
Quick view
Sold out
Placeholder

PM4H-A/S/M Multi-Range Timers

, ,
Multi-Range Timers featuring a universal AC power supply and IP65-rated environmental resistance Since PM4H and LT4H series timers use a transformerless power supply system, the input equipments must have the power supply transformer in which the secondary side is not grounded with the primary and secondary sides insulated, in order to prevent interference of the power supply circuit when connecting the external input circuit The type of load and its inrush current characteristics, together with the switching frequency are important factors which cause contact welding. Particularly for loads with inrush currents, measure the steady state current and inrush current and use a relay or magnet switch which provides an ample margin of safety. Download for specification
Quick view

SERVO MOTOR MINAS A6 FAMILY

,
High-speed response, high-precision positioning for quick and accurate movement

Our proprietary algorithm in addition to upgraded CPU and other hardware realized further high-speed response. Furthermore, high-precision positioning is achieved by automatically eliminating micro vibrations and machine oscillation caused by the resonance.

Easy and quick setting, shortening conventional settling time by approx. 64%*1.

Newly developed fit gain function substantially reduces adjustment time. Adaptive notch filter and various gains can be automatically set and adjusted.

Realized 3.2 kHz frequency response to improve productivity.

Realizes 3.2 kHz frequency response. At 139% that of conventional models*1, it enables hjgh-speed operation and improves productivity.

Download For Specification
Quick view
Sold out
Placeholder

SERVO MOTOR PANASONIC MHME – A5 200V

,

1.Quick

2.0 kHz Frequency Response　(A5 A5E)

Example applicnation : Semiconductor production equipment, packaging, etc

2.Smart

Highly Functional Real-time Auto-Gain Tuning (A5Ⅱ A5 A5ⅡE A5E)

Example application,  Semiconductor production equipment, food processing machinery, etc

3. Light

Example application　Robots, chip mounters, general production machinery, etc.

4. Safe

Example application　Semiconductor and LCD production equipment, etc.

5. Easy

PANATERM Set-up Support Software (A5Ⅱ A5 A5ⅡE A5E)

The PANATERM Set-up Support Software, with many added features. The PANATERM assists users in setting parameters, monitoring control conditions, setup support, and analyzing mechanical operation data on the PC screen, when installed in a commercially available personal computer, and connected to the MINAS A5 Family through the USB interface.

Download for specification
Quick view
Placeholder

SERVO MOTOR PANASONIC MSMD022P1U – A4 1 PH 200W 220V

, ,
  C.C : CATALOG MINAS A4
Quick view
Placeholder

SERVO MOTOR PANASONIC MSMD042P1U / MHMD042P1U – 400W

,
  MSMD042P1U / MHMD042P1U - 400W
Quick view
Sold out
Placeholder

TH13/TH23 Hour Meters

, , ,

Features

1.High-performance compact synchronous motor

2.Compact and stylish

3.Flat terminals for easy wiring

To weld the #187 flat connection terminals (receptacles), please use a "YC-051" tool manufactured by J.S.T. Mfg. Co. Ltd.

4. Rotary indicator (Clockwise, one rotation per 2 minutes)

Typical applications

  • Machine tools, automated machines, control panels
  • Forming machines, medical equipment, generators, compressors
  • Water treatment facilities, presses
  • Motors, etc.
Download For Specification
Quick view